When choosing between whether one wants an open industrial control panel or an enclosed industrial control panel in Denver, then knowing the difference between the two is very important.

Control panels, in general, are fundamental aspects of running an industrial setting and they can be quite complicated. Before even going forward with the selection process, individuals should ensure that they are working with a well-known company that also makes certified boards. Even a small glitch in these complicated boards can create big problems down the road.

Most companies will give the option of choosing between an enclosed or open one. They are both very similar, but they do have their differences. Here are the differences between the two:

Open Control Panel

An open industrial one has several components to it, and the main and most obvious difference is that they are not covered with any additional layers. Their components include the wiring, the terminals, and the other components which are mounted on the terminal. It is important to note that there is no covering on these components, and therefore, it is open.

When installing this type, there are factors which need to be taken into serious consideration since the enclosure will be placed on during the installation process and will not already come with it when it is purchased.

Individuals who are installing it need to make sure that they have tested and verified the ability of the new enclosure to be able to protect the open board as necessary. Not only does the separately installed enclosure have to be very durable, but it should also be installed in such a way that it does not intrude on the wiring and create problems with the functionality and efficiency..

Enclosed Control Panel

These versions are much more simple in their installation because they already come with a built-in enclosure. They consist of the enclosure itself and the wiring, terminals, and other components built into the enclosure as well.

The great thing about the ones that are already enclosed is that they have already been tested to ensure that they are safe and that they function in the appropriate manner. Industrial control boards are always tested for their ability to handle electrical fire and shock hazards.

Whether one opts for an open or enclosed one, both will eventually need to have an enclosure installed at the end. Enclosed ones have already been tested, whereas open ones need to have additional enclosures placed on them during the installation process. These enclosures need to be tested to verify that they are actually durable enough to handle any potential situation.