When you install UL508A  industrial control panels in Denver, you want to make sure that you are able to get top production as soon as possible. However, part of doing this is not just about buying the hottest item you see, but also making sure that you are taking care of it as well. Even the highest quality industrial control panel requires maintenance, and if neglected, it could cause plenty of downtime which means major trouble for your facility. Here are some of the things you need to do to make sure that you are taking care of things.

Perhaps the most important thing that we should discuss in this regard is temperature, as over 55% of all failure of electrical components can be tied back to temperature in some way. Because of this, you want to make sure that the cooling system that you use is specifically sized for your panel. If it’s too small, you end up risking component failure due to high heat, but if you go too large, you could expose your system to condensation and an overabundance of moisture. In addition, you want to make sure that your cooling unit matches the environmental requirements of the factory.

The next thing you want to make sure you have plenty of is preventative maintenance. Part of this is because of the massive variance in terms of panels out there. Some of these only have a few components, while others may need to be housed in multiple cabinets due to the fact that they have several banks of components. In both cases, they need to be regularly inspected by a qualified professional. When someone takes a look at these panels, they are checking for key issues like brittle wires, loose connectors, and components that may just be victim to typical wear and tear. For people who have larger panels, it may make sense to have your professional break the maintenance into a schedule. This can save you the cost of emergency repairs down the line.

Following your inspection, there are a few other things you want to take the time to do as well, like looking at components and vacuuming/cleaning the tops and bottoms of them. Compressed air can be used in areas that the vacuum won’t reach, but make sure that you follow manufacturer instructions in these situations. Other general guidance with these is making sure that you don’t use panels for storage, and creating a proper, organized storage space for parts that people can use as needed. Combine these tips together, and you’re going to get more out of your panels, for a longer time.